Skip to content
  • There are no suggestions because the search field is empty.

Removing and Replacing the PC Module for the Lincoln Kiosk in Portrait Orientation

This guide provides steps for removing the computer module from an ALICE Portrait Kiosk with a 32”, 42" or 55” LCD.

This guide requires partial disassembly of the kiosk. Two people are required to safely remove the monitor from the kiosk.

Prepare a table large enough to hold the Kiosk monitor. Cover it with a soft cloth to protect the monitor's screen when face down.

bqJ9KURMTeiv7eBg3SSnHh8VAR8dY6uCRA

  1. Open the Kiosk door using a security lock.
  2. Unplug the power cord for the monitor.
  3. Under the monitor, disconnect all USB cables
  4. Disconnect the CAT 5 cable.
    Uvvg8r3-JjFzILLsOdN3QAffDcT8lzabxg
  5. From the rear of the kiosk, remove the six screws holding the monitor to the Kiosk base.
  6. Lift the monitor from the kiosk.
  7. With a partner, lift the kiosk at least 8 inches upward along the kiosk slope. Then, move the monitor away from the kiosk.

    MeQ3fmXGpT6obrbLvcVhCS_myPS8XKMluw
  8. Lay the monitor face down flat on the covered table.
  9. With the kiosk lying flat on a table, loosen the two screws securing the computer module to the monitor.

    De6UixPDub2FAg_DATtfYpgYN8yUAyp99Q
  10. Slide the computer module out from the housing compartment.
    qZcUUnlhM55JrpPs6nHO123TvqgJXws_8A
  11. Now, slide the new or repaired module back into the monitor.
  12. Follow the steps in reverse to reassemble the kiosk.